Bally SS Power Supply Rectifier board KIT!

[Homepin]

This is a project we have been working on for some time and it is finally coming together. The PCB is made with 3oz copper (standard PCB is 1oz and the original board was standard) and all tracks are beefed up as much as possible. All parts are 'through hole' NO surface mounted parts are used.

The plated through holes are 'double coated' meaning they received a double thickness of plating and we have added numerous large plated through holes to ensure maximum current flow.

The PCB is screened with legends on both sides making identification of the connection points easy. The connection points that take the wires from the power transformer are all double sized so you don't have to squeeze wires into them. Mains fuse holder is an isolated type for safety and the heatsink was custom made for this job - I even had it anodised a nice gold colour There is a 'power on' LED on the board as well as a very chunky earth tab using a 3mm screw.

All parts will be supplied including brass spacers for the bridges, heatsink compound for the heatsink and all new plastic standoffs for mounting. Also new plugs and connectors to wire on the end of your harness if required (recommended).

I am putting the assembly manual together now and it should be available for download from the Homepin.com website in a week or so. Just waiting on one final part to arrive and we also have to laser cut the clear fuse cover for finished KITs to be ready to ship.

Unsure of the final cost yet but it is likely to be around AU$55~60 Keep an eye on the website for availablity - first batch will be a run of only 30 kits so 'first in - best dressed'.


pst.jpgpsb.jpgpswhs.jpg

[Homepin]

First board assembled - ready to install in my Space Invaders....


bpsass.jpg

[sriley50]

A1 job with these, they look the part, I wish I still had my Harlem Globetrotter now

[Homepin]

Installed in my Bally Space Invaders:

sips.jpg

This is what prompted me to make this board in the first place - the hideous mess that was in my machine:

sioldnew.jpg

[amutechservices]

nice work

[Pash]

A1 job with these, they look the part, I wish I still had my Harlem Globetrotter now

Its in a good place now mate, its not alone, has friends around it.


Excellent job there Mike, you are certainly doing some great work. Think I might have to grab one of these off you when i've got some spare cash. Will have to get some fuses off you as well.

[Homepin]

The first batch of kits are now available (very limited initial run).

Instructions and more details are here:

http://www.homepin.com/rectifierpcb.html

[JPD]

Well done Mike, love your work

[Darksoul]

Nice and beefy!
Bloody great price too.

Well done Mike.

[wise1]

Cheers Mike, Kit arrived today.
Free post for bank deposit and a free home pin pencil